A Third Industrial Revolution | The Economist / quote 2 of 2
Additive manufacturing
And at the most recent EuroMold fair, last November, another group of machines was on display: three-dimensional (3D) printers. Instead of bashing, bending and cutting material the way it always has been, 3D printers build things by depositing material, layer by layer. That is why the process is more properly described as additive manufacturing. An American firm, 3D Systems, used one of its 3D printers to print a hammer for your correspondent, complete with a natty wood-effect handle and a metallised head.
This is what manufacturing will be like in the future. Ask a factory today to make you a single hammer to your own design and you will be presented with a bill for thousands of dollars. The makers would have to produce a mould, cast the head, machine it to a suitable finish, turn a wooden handle and then assemble the parts. To do that for one hammer would be prohibitively expensive. If you are producing thousands of hammers, each one of them will be much cheaper, thanks to economies of scale. For a 3D printer, though, economies of scale matter much less. Its software can be endlessly tweaked and it can make just about anything. The cost of setting up the machine is the same whether it makes one thing or as many things as can fit inside the machine; like a two-dimensional office printer that pushes out one letter or many different ones until the ink cartridge and paper need replacing, it will keep going, at about the same cost for each item.